整卷油磨线主要用于不锈钢冷轧卷带的表面抛光,去除表面缺陷,同时获得装饰级表面,例如No3,No4,HL,SB, Duplo 冷却介质为乳化液或矿物油。需要配置冷却液循环过滤系统。无锡众烁整卷油磨线适用600-1600mm宽,0.4-3mm厚的冷卷加 工。众烁还提供干式整卷抛光线,采用软木砂带获得类似SB的表面,生产线速度在50m/min以上.

CPL is applied mainly for the removal of small defect in coldrolling SS coil in wet, obtain the decorative finishing, i. e. No. 3,No 4, HL, SB& Duplo. The coolant could be emulsion or mineral oil. Coolant filtration and recycling system is essential to the complete line. Zs CPL is designed for cold rolling coil to coil processing up from 600 to 1600 mm width and a thickness between 0. 4 to 3.0 mm.

WUXI ZS also provide CPL dry. Cork belt will be applied to obtain the finishing similar to Scotch-Brite finishing(SB), feed ing speed of dry CPl could be 50m/min or more.

众烁整卷油磨线的特点.
●没有来自设备本身的缺陷与颤纹
●生产线速度高达40mmn
●适合24小时连续作业
●自动化程度高,可以采用恒负载、跳焊缝(焊机选配)等技术
●人机交互HM画面友好
Advantage of ZS CPL
No defects and chatter mark from the line
Line speed up to 40m/min max
Line is suitable for 24 hours continuous production
High level of Automation, i.e. Constant Load. Welding Seam
Tracking System(optional supply with welder)
Operation and maintenance friendly